More product information 78″ V-belt for Husqvarna Combi 94 3-blade cutting deck drive
Outer length: La1992mm
Working length: Lw1974mm
Inside length: Li1930mm
Width: 12.7mm (1/2″)
Height: 10mm
Manufacturer: Kramp FGP011364
ATTENTION! Searching for the belt by the part number gives 100% certainty of fit to your machine. However, if you do not have the part number and are looking for the belt by model, make sure that the Brand / Ser. No. / Art. No. from the rating plate of your mower matches one of the markings below
Replacement / Original No.: 594977801, 544238901, 585034401, 589530001, 594977801
Application: Brand Models / Type HUSQVARNA Rider 13C (R13C), Rider 15C (R15C), Rider 16C (R16C), R213C, R214T, R214Tc, R215TX, R216, R216T
Replacement / Original No. -5310131-33, 5321312-64
Application: Brand Models / Type
HUSQVARNA Side discharge blade drive LT960-12 LT100, LT112, LT120, LTH130, GT160, LT125, YT120, YT125, YT140H, YT161H, YTH112014, YTH142
How to measure a belt:
Outer circumference – LA is measured on the outside of the belt. In the case of longer belts, it is important to measure with an arc on the outside (with a tailor’s tape measure).
Working circumference – LW is measured in a straight line, after cutting, by stretching the tape measure along the belt (with a measuring tape).
Internal circumference – LI is measured inside the belt (with a special tape measure for belts).
You should also remember about the
Width of the belt, if the original belt is 13mm (1/2″) wide, you should not use a belt that is 10mm (3/8″) or 17mm (5/8″) wide.