V-Idler Pulley Deck Drive for AYP GTH 2248 2548 YTH 1848 2148 2448 532193195 532189993

Replaces OEM Part Numbers: AYP 193195, 189993
Replaces OEM Part Numbers: 532193195, 532189993, 532184058
Compatible with: Electrolux DB24H48YT, DB27H48YT, PK23H48YT, SP24H48YT, XT24H48YT
Compatible with: GTH 2248, GTH 2548
Compatible with: YTH 1848, YTH 2148, YTH 2248, YTH 2448, YTH 2548, YTH 2748
810-CID2248L

About 8TEN

8TEN Parts provides lawn & garden replacement parts. Some of the 8TEN Parts product categories include blades, spindles, pulleys, idlers, and chainsaw chains. 8TEN Parts are here for when you need them the most.

8TEN Idler Pulley Part Number 810-CID2248L

Includes: 8TEN Idler PulleyCompatible with the following brands: AYPCompatible with the following models: GTH 2248 2548 YTH 1848 2148 2248 2448Replaces for the following OEM MPN’s: 193195,189993

Inner Diameter: 3/8 inch
Outer Diameter: 4 7/16 inches
Height: 1 inch

Idler Pulley Dimension Terms

Width: The distance from side to side of the pulley, the area where the belt is foundInside Diameter: The distance across the center hole, This dimension should match the diameter of your shaft or boltOutside Diameter: The distance across the circle of the product, from outside edge to outside edge. For flat idler pulleys, this will include the flanges

Back Side Offset: The width from the center of the pulley to the backside edge of the hub or bore adapterFrontside Offset: The width from the center of the pulley to the front edge of the hub, bearing, or bore adapterThroughbore: Length of the bore, from one edge to the other. The Frontside Offset and Backside offset together equal the length of the throughbore

Bearing ID: The inside diameter of the bearing used in the pulleyFlanges: These are protrusions out from the center of a pulley, designed to keep a belt from slipping offStickout: The distance from the edge of the pulley??s flange to the edge of the bore adapter or hub.

8TEN Idler Pulley Uses

Redirect the beltKeep the belt in placePress against the belt to cause the belt to engageThe goal of an 8TEN idler pulley is to move power or items from one place to another8TEN idler pulleys move power by having a drive pulley attached to a motor, that will cause another pulley, the drive pulley, to spinIdler pulleys are pulleys in a system that are not connected directly to the power source, and cannot increase speed or torque